...I routinely find drummers attributing the response of their drum to a single component, most often the material involved or shape of the bearing edge, and it’s important to remember multiple factors play a role in the totality of the sound of a drum.
Jeff Stutzman, Owner, Virtue Drums
Table of Contents
Understanding Bearing Edges
Q: For drummers who may not fully understand the role of bearing edges, how do you explain what a bearing edge is and why it’s one of the most critical elements of a drum’s sound and feel?
Fundamentally, a bearing edge is the portion of a drumshell that contacts the drumhead. It holds a critical relationship to how uniformly your drumhead can move as well as how that movement interacts with the rest of the instrument, most notably the drumshell. Unlike a stringed instrument which utilizes a linear piece of material essentially oscillating in two dimensions, like a guitar string stretched over the bridge and nut of a guitar, a drumhead is a surface that moves in a much more complex three-dimensional fashion, and how that movement plays out is largely based on its interaction with the bearing edge.
Q: How do different bearing edge profiles like roundover, sharp 45°, and hybrid designs affect tone, sustain, tuning range, and head response in your experience?
When discussing different bearing edge profiles, I think it’s important to mention that other variables contribute to the overall sound and performance of a drum, including the ones we just discussed, as well as things like:
- the shell type (e.g. ply, stave, steambent, metal)
- the thickness of the shell,
- and whether it has any reinforcement rings, beads, or hammering.
I bring this up because I routinely find drummers attributing the response of their drum to a single component, most often the material involved or shape of the bearing edge, and it’s important to remember multiple factors play a role in the totality of the sound of a drum.
So, if we can put anecdotal notions aside and assume we’re working with equally well-executed edges, I believe the outer cut has the greatest impact on the sound and performance of a drum. This is because it directly affects two critical components, including where the apex sits and the amount of head-to-shell contact. Unfortunately for many years most marketing material in the drum industry has focused on discussing the inner cut of the bearing edges, and I simply don’t believe this has the dramatic effect that has been implied.
If we focus instead on the details of the outer cut, I find a large outer roundover that marries-up well with the curve of a drumhead offers the best balance in both tone and performance. A smaller outer round-over can be useful in some instances to increase the attack or sustain of a drum, while an angled 45° type of cut can create even more attack, however in my research of these variables, it can also cause the drum to sound overly-ringy or choked at different dynamic levels, so I tend to avoid it in lieu of a more versatile response.
As far as tuning range, the most important variable is getting the edges level. Your drum should not have a narrow “sweet spot” if the edges are executed well. That said, I do find that an outer roundover works better at low tensions when compared to sharper cuts.

Bearing Edge Repairs & Modifications
Q: For drummers considering bearing edge work, what signs should they look for that their drum might benefit from professional attention?
Common symptoms that indicate your drums would benefit from bearing edge work include:
- difficulty with tuning
- having a limited tuning range or “sweet spot”
- de-tuning regularly
- wrinkles in the head even after you feel you’ve applied even tension
- and any instance where you’re simply unhappy with the overall sound of your drums.
We’re happy to evaluate your edges for no charge. Frankly, I haven’t come across any mass-produced drums that wouldn’t benefit from the attention of a skilled craftsman-approach to help improve their performance, even on very expensive drums, even ones that are brand new out-of-the-box. It’s simply a detail that doesn’t get the careful attention it needs at large-scale production.
Q: When a drum comes into your shop what’s the first thing you’re evaluating when you inspect the bearing edges?
The first thing I want to know is how the instrument currently performs for the drummer that’s playing it. I always want to have a sense of what they like or don’t like about the sound and performance of their drum, as well as a good understanding of the context and genre of music they’ll use it in.
Once I’m clear on those practical matters I can begin to diagnose the drum from a more technical perspective. In my opinion, the three most critical variables related to bearing edges are:
- Is it level, or what I call true? I check this by placing the drum on a perfectly level granite surface plate and putting a bright light inside of the shell that reveals any spots where the bearing edge is not touching, which indicates an edge that isn’t true. You’ll find that typically these inconsistencies allow the drum to wobble back and forth on the surface plate as well. Edges that aren’t level will negatively affect the sound and rebound of the drum, make it more difficult to tune, cause it to de-tune more often, and can also cause premature wear on your drumheads.
- Where is the apex, or peak, of the bearing edge? My philosophy is typically to design an edge so it doesn’t hit in the curved portion of a drumhead and avoid needlessly distorting that curved material. The apex is affected most obviously by how far the outer cut of the bearing edge comes inward, but it’s also impacted by the diameter of the shell. The modern standard is for drumshells to be an 1/8” under the stated diameter, but shells do vary, and some companies intentionally make their shells undersized to modify where the apex connects with a drumhead, so you have to factor that in too.
- How much head-to-shell contact is desired? If your intent is to engage the shell as a cohesive part of the sound, more contact between the head and bearing edge will help foster that outcome. Conversely if you want the drumhead to dictate most of the sound, you would want less contact.
Q: When customers send you vintage or neglected drums for edge work, what are some of the most common issues you encounter and how dramatic can the transformation be after proper edge work?
Vintage drums really come to life with good edges. Many of the old edge designs offer inspiration for the work I do, but they simply weren’t executed that well, and/or they’ve deteriorated over the years. This leaves the drum with a kind of wonky and lifeless sound. Sometimes people find that sound endearing, but frankly it’s not hard to find ways to dampen your drums and I’d rather have options at my disposal with good, versatile edges that can readily cover a wide range of tuning and hold that tension very well.
Another common thing I see with older drums is that the re-rings and plies are de-laminating, leaving them in need of structural repairs that, once remedied, can really breathe new life into the instrument and keep ‘em making music for many years to come.
Virtue Drums' Approach to Bearing Edges

Q: Are there specific bearing edge designs that you consider part of the Virtue Drums sonic identity? What led you to those choices?
Typically, I utilize large outer roundovers for the reasons discussed. I think it offers a cohesive, versatile sound that helps engage the drumshell at all dynamic levels and tuning tensions. Also, the drums I make have a very open, resonant sound that can be tailored to suit any situation by adjusting the decay with your preferred dampening methods.
To support that approach, I’ve developed a unique design for our Humility™ series that I call Timbre-Ring™ (shown below). It involves installing a reinforcement ring on the batter edge only. This design allows for exceptionally warm, open tone by utilizing a thick, asymmetrical round-over, allowing the drum to demonstrate a “pre-EQ’d” sound with superior shell resonance when compared to drums with traditional reinforcement rings or thicker shells, while also minimizing the increase in pitch and reduced sensitivity that is inherent in those other shell designs. The tone of the instrument also adapts dynamically to the player’s input, creating a natural compression at higher dynamic levels and a pure sonic decay that you simply won’t find in other drums.
Beyond those services, we also professionally wrap drums, cut down the depth of bass drums and power toms, do a fair amount of layout & drilling work for alterations or hobby builders, repair cracked shells and hoops, fix stuff that’s broken or needs to be replaced, as well as perform maintenance and on-site services for venues, studios and churches.

Final Words with Jeff Stutzman of Virtue Drums
Q: If drummers walk away from this conversation understanding just one thing about bearing edges, what do you hope that is?
I hope I’ve inspired more drummers to recognize the importance bearing edges play in defining the sound and performance of their instrument. You shouldn’t have to fight your drum for the sound you’re after. It can and should serve you well, and probably doesn’t cost as much as you expect. Look us up at VirtueDrums.com for more information.






